1966 chevelle question

[USAZR1]

Originally Posted by wyattroa

Alright I am trying to get in contact with the owner of the car posted down below. I plan to do the same thing with my wheels and run the weld rts line of wheels. I have found out the wheels are 18x10 in the rear and 18x9.5 in the front. What I am trying to figure out is the backspace they are running on these wheels. I will be running the same suspension setup as they are. Does anyone have any information on these?
Robert

18x9.5's w/5.75" backspacing (+12 offset) will work well on the front of a 66-72 Chevelle/Elco. 18x10's w/5.75" backspacing (+6 offset) work very well, on the rear. What suspension mods/brakes will be on your car, Robert?