DSE subframe connectors- Interior finishing question

[paulk68]

Originally Posted by Gmachine1911

I used 1" dense foam and built it up in layers to follow the floor contours. Glued the layers together with 3M spray adhesive. A 4" grinder with a flapper disc works perfect for shaping it. Here's what mine looked like when it was done...

Looks awesome can you tell me about your shifter setup, shift boot, shift lever and lever size?
thanks

[DWC]

I wanted to follow up with my solution. I found some anti-fatigue mat from Northern Tool for $10. It was dense enough to accomplish what I wanted. Cheap, simple, effective.

Daniel

[Gmachine1911]

Originally Posted by paulk68

Looks awesome can you tell me about your shifter setup, shift boot, shift lever and lever size?
thanks

Thanks! No problem...the shifter boot, trim ring and lever are from Finch. It's the smaller of the two sizes he offers. The shift lever is the 8" and the shifter handle is from American Powertrain. The trim ring is a two-piece design and everything was top notch quality. The shifter handle came with two set of bushings with different offsets so you can get the angle you want. Hope that helps!

[jlwdvm]

I used Harbor Freight floor mats that I cut to shape: dense, cheap, easy to cut!