Hobbs Camaro (Old Drag Car)

[ScotI]

Mark,

What adapter was used for the intake that allows this packaging? I was looking into an aftermarket style body but I'm intrigued about possibly using my existing 6.0 DBW unit.

Or if you know of any other details on this I can research/investigate that you could share, it would be appreciated.

[camcojb]

Originally Posted by ScotI

Mark,

What adapter was used for the intake that allows this packaging? I was looking into an aftermarket style body but I'm intrigued about possibly using my existing 6.0 DBW unit.

Or if you know of any other details on this I can research/investigate that you could share, it would be appreciated.

Probably this or something similar.

https://www.summitracing.com/parts/h...xoCS1sQAvD_BwE

[ScotI]

This is what I was hoping for (available vs something that was one-off built).
TY sir.... I'll check into it.

[jeff71]

Here’s some I know about.

https://www.delmospeed.com/product-c...body-adapters/



https://www.lsclassic.com/intake-sys...ir-cleaner-kit


https://www.psiconversion.com/CLASSICLS/THR-9930.html