Next up, was making a throttle pedal mount, and getting it mounted in the car. From there, I moved to the PSI ECM wiring going to the firewall plugs. Yes, the wife let me use the kitchen island to lay everything out. She is a jewel, as I am sure everyone's here is as well.
Yeah, I'm looking at the same wiring plug setup on mine, fortunately I won't be in a rush. I also have a big kitchen table lol.
Next comes routing the wiring under the dash. Bought some magnets for band ties that seem to be interesting for the routing. More on that later.
Thanks for looking.
Bill
I used the magnet on my Camaro and once all the wiring was complete I put a little panel bound in the center of the magnet ring to make them permanent.
Sent from my iPhone using Tapatalk
__________________ marty-mj
Is a car ever really done???? It's like a ball of yarn unwinding, that has no end... Author DKz Garage
I used the magnet on my Camaro and once all the wiring was complete I put a little panel bound in the center of the magnet ring to make them permanent.
Sent from my iPhone using Tapatalk
Had not thought of that, but will look into it. Seems like a good way to finalize the process.
Great progress Bill. Sorry to read about your troubles sir. It seems like this has been a common theme for many lately. Keep after it, you’ll be driving it before you know it.
Great progress Bill. Sorry to read about your troubles sir. It seems like this has been a common theme for many lately. Keep after it, you’ll be driving it before you know it.
Scott, thank you for the kind words. It does seem that this is part of life now, but it is all good. I have been fortunate that I had some time during the holidays to work on it.
I still plan on getting by to see you at some point, as we discussed in the past.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
It's like a ball of yarn unwinding, that has no end... Author DKz Garage
Linear Mode
