...

Go Back   Lateral-g Forums > Technical Discussions > Paint and Body
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 07-25-2008, 03:03 PM
rallye455 rallye455 is offline
Senior Member
 
Join Date: Feb 2007
Location: White Plains, MD
Posts: 269
Thanks: 0
Thanked 0 Times in 0 Posts
Default What is the best way to remove undercoating?

I'm getting ready to work on the underside of my 72 442, What is the best way to remove undercoating?
Reply With Quote
  #2  
Old 07-25-2008, 03:05 PM
rjsjea's Avatar
rjsjea rjsjea is offline
Senior Member
 
Join Date: Sep 2007
Location: Oregon
Posts: 667
Thanks: 0
Thanked 1 Time in 1 Post
Default

My car was completely torn down, had it sand blasted. Turned out very nice.....took all the rust, undercoating and grime away.
__________________
RobS
71 Demon, AlterK - 4 link GenIII hemi conversion
66 Rambler Classic Wagon, LS conversion -Scott's IFS/4bar-bagged
Reply With Quote
  #3  
Old 07-25-2008, 03:07 PM
jy211's Avatar
jy211 jy211 is offline
Senior Member
 
Join Date: May 2005
Location: Miami Florida
Posts: 1,243
Thanks: 0
Thanked 1 Time in 1 Post
Default

just had the bottom of my 55' chevy done. Took away 99.3% of the grime and undercoating...

Last edited by jy211; 08-28-2008 at 03:17 PM.
Reply With Quote
  #4  
Old 07-25-2008, 03:56 PM
Denvervet's Avatar
Denvervet Denvervet is offline
Senior Member
 
Join Date: Aug 2007
Location: Denver
Posts: 143
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I had to use a propane torch to heat it up a bit then it comes off like butter. Then I used paint thinner in a spray bottle ( after and separate from torching ) let it soak then wipe away with lots of disposable towels...the blue or paper ones. It is a lot of work but turns out well. My media blaster said the media won't remove undercoat.
__________________
68 camaro, 572, tko
Reply With Quote
  #5  
Old 07-25-2008, 05:48 PM
gearheads78's Avatar
gearheads78 gearheads78 is offline
Senior Member
 
Join Date: Feb 2007
Location: Dallas TX
Posts: 801
Thanks: 2
Thanked 2 Times in 1 Post
Default

Quote:
Originally Posted by Denvervet View Post
I had to use a propane torch to heat it up a bit then it comes off like butter. Then I used paint thinner in a spray bottle ( after and separate from torching ) let it soak then wipe away with lots of disposable towels...the blue or paper ones. It is a lot of work but turns out well. My media blaster said the media won't remove undercoat.
Heat gun and a wood paint stir stick to keep from gouging the metal for 98% of it. Wax/gease remover and a brush to aggitate the remaining residue.
__________________
66 Cutlass "Joe-Touring"
54' Olds 88 "Joe-Touring 2.0"
69 SS Camaro 4-speed (wife's)

Richard J.
If only I had the time talent and money to build everything in my head
Reply With Quote
  #6  
Old 07-25-2008, 07:14 PM
rallye455 rallye455 is offline
Senior Member
 
Join Date: Feb 2007
Location: White Plains, MD
Posts: 269
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I was looking for another method other than sandblasting. I just finished sandblasting the frame and will never do anything that big again, the mess is just too big.
Reply With Quote
  #7  
Old 07-25-2008, 08:22 PM
BBC69Camaro's Avatar
BBC69Camaro BBC69Camaro is offline
Senior Member
 
Join Date: Dec 2007
Location: Los Angeles, CA
Posts: 572
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Angle grinder with a wheel cup wire brush works pretty quick, just messy as all get up when you are underneath it.
Reply With Quote
  #8  
Old 07-26-2008, 02:15 AM
monza's Avatar
monza monza is offline
Senior Member
 
Join Date: Jul 2007
Location: calgary, AB
Posts: 837
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Have some one else do it, is the best way!

Tiger torch, scraper, welding gloves and beer is next best IMO.
__________________
Dave
FUeL 69 Camaro RS
68 Corvair coupe
65 Impala SS
65 Corvair convert
64 Corvair Rampside
62 Corvair Greenbrier

http://www.sourceboards.com/
Reply With Quote
  #9  
Old 07-26-2008, 01:55 PM
rallye455 rallye455 is offline
Senior Member
 
Join Date: Feb 2007
Location: White Plains, MD
Posts: 269
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks for the replies guys....looks like another messy project.
Reply With Quote
  #10  
Old 07-27-2008, 03:47 PM
Jay Hilliard's Avatar
Jay Hilliard Jay Hilliard is offline
Senior Member
 
Join Date: Nov 2004
Location: NC
Posts: 1,119
Thanks: 34
Thanked 16 Times in 12 Posts
Default

Quote:
Originally Posted by BBC69Camaro View Post
Angle grinder with a wheel cup wire brush works pretty quick, just messy as all get up when you are underneath it.
This is the way I did. It gets you dirty, but you can do it in your shop when you have time and saves $$ for other car stuff.
__________________
Jay
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net