killerdiller prodject KD-69

[killerdiller]

This is what I started with

This is were Im at now..love this site,
Im going to have alot of sheetmetal work,and alot of questions..

[killerdiller]

Any know a good place in Columbus for media blasting ??

[70rs]

Welcome to the site! Thanks for posting. Your little helper there is just like mine. Good to have a hand running for tools, even if they bring back the wrong ones.
Looks like a great project, keep the pics coming!
What rotissery is that and are you happy with it? I need to get one ASAP but don't know what one is a good one.

[killerdiller]

Thanks for the welcome 70rs.I forget the brand name but I think it was about $1200.I'll have to look up the receipt.Its working great,but not knowing body work i dont know how much of the sheetmetal I should do while its on it.Thank god for the great members of this site that i'll be looking to for advise...
ps..i should have some pics of GoodGuys Sat to post...

[70rs]

No problem, glad you are here.
I don't know much about body work either, but I have read and been told it is not a good idea to change body panels on a rotissery. (welded panels) I guess it is not secure enough (the body strength) to get good alignment when you go to weld new ones on. Also, brace everything inside with tubing, weld it in, when you start cutting out rusty areas of your body.
I am not the guy to give advice on body work. Just brace it all really good to maintain "square" before you cut into it.
If you have a chance to find out what unit that is, I'd appreciate it.
thanks,
Eric

[GHOSTDANCER]

Good luck with your build and welcome to

[tones2SS]

Welcome to the best car site on the internet and good luck with the build!

[ProdigyCustoms]

Welcome. Great to see the little guy has some cool old car love! Get his hands dirty early!

As for the questions, feel free to call anytime if you need advice.

[XcYZ]

Welcome aboard. Great pics with your son.