Goodguys 2015 Giveaway C10 by Scott's Hotrods

[FaBrycation]

Scott's is pleased to announce the build thread for the Goodguys 2015 C-10 Giveaway truck.

We are very excited to get this opportunity and are going to do our best to make this the nicest giveaway vehicle to date.

Here is a general lay out on the Goodguys giveaway truck

1.Scotts tube chassis
Tube x-memeber
Body mounts
100% tig welded

Scotts standard ifs
New power rack
Tubular upper and lower a-arms
Cnc machined rodends
Modular dropped C-10 spindal
Ridetech SA coil-overs
Torsion splined bar
Wilwood 14 inch slotted rotors
Wilwood W6A Caliper

Scotts L-s m/m
Scotts tranny mount

Brake lines plumbed s.s
Fuel lines plumbed s.s

Scotts standard 4-bar
Ridetech SA coil-overs
Scotts Watts link

Moser fabricated 9 inch rearend
Wave track 373
33 spline axles
Wilwood 14 inch slotted rotors
Wilwood W4A caliper

Scotts fuel tank with efi pump

Wheels
Billet specialties
Rear 20x12
Front 20x10

Motor
Lingenfelter Performance LS3 motor
TCI automotive tranny

Headers and Exhaust
Custom S.S headers made by Scotts
S.S mandrel bent exhaust by Scotts

Ride height on truck will be 4 1/2 from ground
Overall height on C-10 will be 56 1/2 to the ground

Body mods
Several custom modifications to many to list
There will be a ton of build pics for you all to see

Paint
Palmers customs to lay down one of his stellar jobs

Interior
Ron Mangus to do one of his one off interiors

Our goal hear is to build a truck that you all will remember for years down the road

Completion of this build will be early Spring 2014

Lets get this started! When the truck came to us, the original cab seemed to be in ok shape. But as any experienced builder knows, its what you cant see that will haunt you.

After starting the tear down it became evident that this cab had a lot of issues that obviously weren't seen. So we dismantled the cab, sent it out to get blasted and primed, and have now begun the process of repairing and customizing the cab.

here are the pictures.

[FaBrycation]

[FaBrycation]

as you can see. lots of underlying rust.

[FaBrycation]

[FaBrycation]

[05chevy]

The truck looks great so far! This is the same body that was at Ironworks im assuming? Are you guys using the front end that was already built? And why not just have the truck dipped an e coated? I cant wait to see more of this!

[FaBrycation]

Originally Posted by 05chevy

The truck looks great so far! This is the same body that was at Ironworks im assuming? Are you guys using the front end that was already built? And why not just have the truck dipped an e coated? I cant wait to see more of this!

Thanks. it will be getting one of Our Scott's Hotrods C-10 chassis with all of our components

As for the having it blasted? We had a situation a few years back where we had dipped and coated a car. after the car was painted some remnants from the dipping caused it to eat the paint around spot weld seams and had to have it all redone. They use a plastic media to blast it. Also that is why we had to remove the inner cab structure, so it could be blasted internally and properly remove all of the cancer.

[coolwelder62]

Nice work!!!

[SWAPMEETCRAZY]

Looks great Brycen...Here's my latest addition to the "different"....just which I had your talent and tools...!!!.Whats a good time of day to call Justin on those cowl vents...thanx jim

[FaBrycation]

Originally Posted by SWAPMEETCRAZY

Looks great Brycen...Here's my latest addition to the "different"....just which I had your talent and tools...!!!.Whats a good time of day to call Justin on those cowl vents...thanx jim

awesome, Looks great! You can call anytime 8-5 Monday -friday.

Originally Posted by coolwelder62

Nice work!!!

Thanks!