A little update...

[XcYZ]

That's awesome, Rob. That intake is going to look killer on your motor.

The rotisserie... why I didn't buy or fabricate one for my project is beyond me.

What's the next step?

[GHOSTDANCER]

Looks Great

[Rybar]

Lookin good Rob, that intake is sick. I don't wanna know what that costs...

[Sales@Dutchboys]

WOW! that intake is frickin sweet!


Paul

[rwhite692]

Originally Posted by XcYZ

That's awesome, Rob. That intake is going to look killer on your motor.

The rotisserie... why I didn't buy or fabricate one for my project is beyond me.

What's the next step?

Thanks Scott...yes that rotisserie has paid for itself big time, in terms of saving my back...The next step will be to install the rearend housing (you might remember it's a DSE fabricated 9inch, the Qlink brackets are already on it) and locate/install the upper shock mounts...then send out the housing for powdercoat and while that's going on I will start in on the roll bar/partial cage, then prime the bottom of the car / apply bedliner material...and still have to make up my mind on the front subframe...so, there's still tons of stuff to do!

Paul, Ryan thanks for the kind words...The intake was a killer deal that I could not pass up; my project budget wouldn't normally allow for a custom sheetmetal intake, had it not come along, I was going to get my existing (cast) Dart intake modified for injector bungs, etc.

[awr68]

Originally Posted by rwhite692

...The intake was a killer deal that I could not pass up; my project budget wouldn't normally allow for a custom sheetmetal intake, had it not come along, I was going to get my existing (cast) Dart intake modified for injector bungs, etc.

Good things happen to good people!!