New Vendor Sponsor--new Vintage

[marks914]

Thanks for the kind words.
bowtieracing:
We do metric dials all the time, the only thing is right now the odometer is still english. We can get some metric speedos though if the demand is high enough. We have to buy them in quantity of 12, which is pretty low.
Here is a metric set we did recently as a private label program for a company in Denmark:

Here are the custom indicator panels for the same company, we just changed the graphics to suit their needs and theme.


Yes, custom work for some reason was always so expensive. We try to give options to keep it affordable. We charge for the parts, dials, design and assembly. the estimate is itemized so you see exactly what everything costs, its not a blank invoice that says custom gauges $xxx.xx
here is a set we did for a customer who wanted to retain the stock theme on his 550HP Datsun. we were running out of room for everything he wanted to monitor so we decided to use a combination of Haneline 3-1s and Autometer gauges instead of our products. It was a bit more expensive but he was able to get all of the function and we kept the stock theme on all the instruments. The average Joe will probably never know the gauges were changed out. We were even to incorporate turn signals and high beam lamps.

[redfire69]

Nice looking products. Do you have a 6 gauge setup that will fit into the two bezels of a stock-like 69 camaro dash panel?

[marks914]

Originally Posted by redfire69

Nice looking products. Do you have a 6 gauge setup that will fit into the two bezels of a stock-like 69 camaro dash panel?

69 had 2 big gauges on each side and the rest were on the console I believe, so to run one of our 6 gauge kits, you would need a panel like a Covan's or similar. I would either modify Camaro panel or just get an aftermarket one and fit the 1969 series in there. We are working on a direct-fit setup with 2 gauges, but its not quite ready for prime time, another week or so. We can perform the install to the panel if needed.
Hopefully this helps
Mark

[redfire69]

I was thinking of running just the two big gauges with all six indicators like you have shown above for the datsun. I'd like something that would fit in a modified stock dash.

[marks914]

Originally Posted by redfire69

I was thinking of running just the two big gauges with all six indicators like you have shown above for the datsun. I'd like something that would fit in a modified stock dash.

Sure, send we can do that, just let me know what gauges you want and we can come up with a plan.
Here are the 3-1s with the Camaro theme on them, still rough though.
Mark

[redfire69]

Originally Posted by marks914

Sure, send we can do that, just let me know what gauges you want and we can come up with a plan.
Here are the 3-1s with the Camaro theme on them, still rough though.
Mark

That's exactly what I had in mind! I'll be in touch- Ron

[70rs]

Mark, what is the total outside diameter on the gauges show above? Those are pretty cool!