How do you do your gaps and alignment?

[68protouring454]

Originally Posted by DOOM

So adding rod to the edge is butchering... But if you have to, go head and do it Stefan... Not tring to bust chops here just tring to learn,I know you know what your talking about. But if I tried all that you said and still can't get a proper gap go head and weld the rod to the edge. So go head and butcher it Is'int this a contradiction. Help me understand. I have the same concerns and see alot of the top builders using this method. I also see them splitting the edge and filling the gap to tighten up the gap.Is this better? Have you done this? Butchering my car is the last thing I want to do..

yes i use that method on trunk gaps, and hood gaps, alot easier to work.


shearing thin pieces of 18ga to fill split to weld, we spot(sparingly) ,with mig, then tig weld with silicon bronze alot of time, makes metal finishing so easy.

we sheared an even 1/4 piece till it tapered we then sheared the angled piece. all was butt welded, under neath was cleaned up as well. makes for the best gap repair possible.