Need Info Fast, Ordering Tomorrow!!

[Speedfreek]

Originally Posted by awr68

Did they ask if you are running 4 wheel discs? This will make a differance. How low is your car...I don't think Foose gets them down there like I do!

I have 17x8 w/ 5" bs...I like the fitment. I think you are pushing it with these wheels, I personally don't see them fitting...listen to Jody!

If you get these you may need to roll the fender lips and possibly run spacers too...

I have seen 10" wheels w/ 285's fit 69s but the bs must be right on!!

He didnt ask me about the brakes, that kind of makes me wonder. I've been searching for about 1.5 yrs trying to decide which rims I want and I really have my mind set on these but if there are too many negative things that i've got to consider, I'll just get something else rather than going through the hassle of ordering and waiting then not fitting, that takes alot of time and I'm ready for rims now. Here is a pic of my car.

[Autokraft]

Nice car.


Kurt

[syborg tt]

You need to go to Billet Specialties web site and download there wheel backspacing worksheet. Once you've downloaded that follow the instruction and you will be able to figure out your backspacing.

The other thing to consider is are you going to upgrade your front or rear brakes. If so do that first as the thickness of the rotor hat may/will change and that will affect how your wheels fit.

http://www.billetspecialties.com/ite...pid=596&rdir=1

[Rybar]

I can't see that rear BS working with the stock wells. You need more like 5.75" or 6" with a 10" wheel, and you'll still have to roll the 1/4 lips.

I'd recommend using the chart that syborg tt posted.

[69MyWay]

I have:


i. Front: 245/45/17 on 17” x 8.5”
ii. Rear: 275/40/18 on 18” x 9.5”

Under my 69 Camaro. I am using the stock C5 offset with 2.5" added to both sides of the rear axle (extended the 9" axle housing) and running 2" spacers on the front wheels.

I have rolled my fender lip. I still get rubbing in the rear (on the inside next to the frame rail) on extreme bumps with four people in the car.

There is no way those tire and wheel sizes listed will fit a stock 69 Fender.

[Speedfreek]

Well I just got off the phone and have decided NOT to go with 10'' rears. He said he could have had them made for me in the sizes that I wanted for $1100ea. I've e-mailed Foose and asked them if they could make them for me. I've already e-mailed them once but this time I sent a pic of my car. If they dont respond I am gonna tell them that I am getting Boyd rims , I bet Chip would love to hear that.

[MarkM66]

$750 per wheel.

Rears wont fit.

[Datsbad]

you can get much nicer wheels for $750 each . dont do it . they will not fit !!

[lil427z]

Originally Posted by Datsbad

you can get much nicer wheels for $750 each . dont do it . they will not fit !!

well said.
rick k

[Speedfreek]

Yea I better get something I know will fit, so much for the Foose wheels, they havn't even responded to any of my e-mails. Looking hard at the Billet Specialties SLX45's