'67 Chevy II Project

[wiedemab]

I'm not sure who builds them, but they are from Detroit Speed. I had several people working on alternative options for me, but we weren't able to find anything that fit - -- or fit to my liking. These were expensive, but they fit absolutely perfectly.

[KPC67]

I agree with you on the headers, the DSE stuff just fits so darn nice you can't help yourself. you will forget about the cost down the road...

[wiedemab]

Haven't been very good about taking pictures. I have the seat supports all welded in and tied them together under the trans tunnel. I also decided that I didn't want my exhaust to be below the rocker panels - -- sooooo. I ended up with a bunch of 304 stainless oval tubing from Vibrant (via B&B Classics). Billy also make me an X-pipe which is a piece of art. I'll be running Borla Pro-XS mufflers. I plan to fab up the entire exhaust prior to putting the floors in the car. Another side-effect of the exhaust being tucked up so high is that the first cross-member that I made just didn't suit me any more. I changed the support structure and built a new cross-member. Sadly, I had quite a few hours in the first one, but it will be put to good use as "garage art".

Version 1 & 2:

[SlowProgress]

Cool project. I am doing an oval exhaust also. The crossover looks really nice.

[waynieZ]

It will be nice having the exhaust tucked up nice and tight.

[wiedemab]

Few quick updates.... Worked on buttoning up the dash around the cage tubes.



Trans tunnel work.



Nice billet bezel that I picked up from Billy at B&B

[65_LS1_T56]

Originally Posted by wiedemab

Nice billet bezel that I picked up from Billy at B&B

[wiedemab]

Originally Posted by 65_LS1_T56

Limited edition- special run - -- with some help from an unnamed party.....

[no go nova]

You wouldn't mind making another Trans tunnel😉?

[65_LS1_T56]

Originally Posted by wiedemab

Limited edition- special run - -- with some help from an unnamed party.....