Camaro LT5

[Stielow]

Originally Posted by cjfirstgen

Would you do the same size lines 1/4 to the tee front and rear with manual big brakes for the track? Note: 7/8" bore size master cylinder and caliper piston area spec'd for a manual big brake setup

If I was building it I would use 1/4. I think 3/16 would be fine.

I don’t have any good data on passive brakes. I have not used them for 12 years.

On my older builds I did 3/16 to the front tee.

It worked.

Mark


Sent from my iPhone using Tapatalk