Took the 69 LSx Camaro to the Orlando 1/4 Mile Sunday...

[69MyWay]

Two runs only. Track was super busy coupled with a crash and several blown engines to slow things down.

Specs:

69 Camaro www.mcspeed.com
2000 LS1
SLP Stage III head/cam/LS6 intake/36# injectors
Long tube headers
TCI 2,900 stall
Transgo shift kit
9" with 3.5 gears
285-40-18 Goodyear EMT Runflats out back
VB&P fiberglass rear springs
Edelbrock shocks
7/8" sway bar
Car has full accessories - a/c, power windows...etc. etc. etc.

First run:

60' 2.092
1/8 8.236 89.13 mph
1/4 12.7 109.52 mph

Second run:

60' 2.070
1/8 8.121
1/4 12.539 110.74 mph

This on a full tank of gas which I figured would help with traction since I have a 22 gal plastic caprice tank fused in there that addes plenty of weight on the axle. My 60' stinks...but that is because I just rolled up in D3, rolled out on the green, then eased into it. I assume higher mph and ET (with traction) if I had sincerly launched the car. I just left it in D3 and let the computer shift.

If I could just squeeze that 60' down to 1.8 and hold it manually through red line...I think a 12.0 is not unreasonable!

The best part was leaving the track, rolling up the window, cranking down the a/c (it was over 80 degrees in Orlando this last Sunday), and cruising home with the stereo blasting, air pumping...and cruise control locked down.

[Steve Chryssos]

Nice. Any wheelhop problems? What springs are you running out back?

[ProdigyCustoms]

You should have called, we would like to have met up. nice numbers

[69MyWay]

Hey Frank...It was one of those last minute things. I'll call you next time.

Springs are just VB&P mono glass models. No wheel hop at all.

I also have not launched it really hard either. If I cam off the line over 2,000 RPM, I would be surprised.

[XcYZ]

Cool, Chris. I agree, a 12.0 should be within reach with a good 60'.

Have you weighed the car?

[HAULNSS]

Nice runs and nice setup!.

I have heard the EMT's are hard like a rock. I have no experience with them, but the Vette guys seem to dislike them from a performance standpoint.

I bit stickier tire could really pick up the 60' times, too.

Good luck!

Randy

[Steve68]

I could hear them running almost all day! should have gone but I was working on the car and house, wrecks and oil downs @ Speed world no not there

[Rybar]

Nice runs, I say throw a drag radial on there and watch those times drop!