Quote:
|
Originally Posted by 69MyWay
I made a bracket to hang it on the passenger side of the firewall between the vintage a/c unit and wall. I drilled my wire harness hole in the top of the trans tunnel (I am a freak about hiding everything).
The bracket turned out really cool because I made it to allow the computer to slip fit in place (the sides have a taper on the mount), then I have a small plate that goes on the bottom and tightens up with two nuts. It took me all afternoon one day to rough this out. If you look at the computer, there are very few options to just "bolt" it down.
BTW, what brand header is that (or homemade)?
|
That sounds awesome, how big of a hole did you drill and where did you get the grommet??
The headers are Street & Performance shortys. They are pretty nice, but because thier shorty's they may hold me back from my 400 rwhp goal. (stock heads, TSP cam/tune)
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Linear Mode
