Full Racepak Digital Dash or a full set of Autometers...

[Musclerodz]

IQ3 is what we will be using. It is not that much more expensive than a full set of Autometers if you are running EFI with the right ECM you can datalog from and don;t have to buy a bunch of senders. They are not cheap.

[chicane]

Not as bad as it has been portrayed:

250-DS-IQ3, IQ3 DISPLAY DASH = 625.00
Just the dash, you install sensors for your needs.

250-DS-IQ3EFI, IQ3 EFI LOGGER DASH = 1495.00
As it states, this model is for EFI, which I believe you stated you were not running... but this price includes 32 channels of data-logging capability.

250-DS-IQ3LD, IQ3 LOGGER DASH = 1395.00
Similar to the 250-DS-IQ3... but, with 32 channels of data-logging capability. You install the sensors for your needs and it has the ability to record.

Read up on the information in the link I directed you too in my last post. There are infinite capabilities for keeping it on the cheap... or going to a full blown EFI (E38, Bigstuff, MEFI etc etc) with data-logging capabilities. The IQ3 is a no brainier for me.... as I was in your exact situation dealing with the idea of $3000 for the required Autometer components to suit my needs... or $1495 for the IQ3 which exceeds the basic needs AND having 32 channels of DA, GPS speed, GPS track mapping and a 3 axis accelerometer for doing advanced development of spring and damper packaging. But... I am also going EFI... so there are inherent capabilities with that as well.

Now I pretty much get the same DA and instrumentation with the IQ3 as I would have with the $3000 in Autometer and the other $7000 in the Advantage Motorsports Data Acquisition system to meet the same requirements. Oh yeah... and it plugs right into the E38 ECU and CANBUS I/O structure.